ALUMINIZED FABRIC
Aluminized fabrics are laminated in Texfire’s facilities and they are divided in two groups, depending of the aluminium sheet nature:
- · Aluminized fabrics that directly use a aluminium layer (AL fabrics) show an excellent resistance to direct flame contact.
- · Aluminized fabrics that use a film recovered by aluminium powder (ALPET fabrics), which offer the highest values regarding radiant heat reflection, without compromising the fabric flexibility.
Different flame retardant fabric compositions are used as a basis of aluminized fabric, depending on the lamination’s final application: thermal barriers, steelmaking gaiters, curtains for ovens, are some examples of Texfire’s aluminized fabrics real applications.
Fiberglass aluminised fabric is thought to protect before temperature chances, oils and organic acids spills and industrial insulations.
Composition: 95% Fiberglass 5% Aluminium
Resistance: 260ºC in continuous
Weight: 200 g/m² ±5%
Width: 150 cm
Featured: Thermal isolation
Fiberglass aluminised fabric is thought to protect before temperature changes, oil and organic acid spills and industrial insulations..
Composition: 95% Fiberglass 5% Aluminium
Resistance: 550ºC
Weight: 430 g/m² ±5%
Width: 150 cm
Featured: Thermal isolation
It allows the insulation of radiant heat sources, the same time it offers good protection to small splashes of melted metal.
Composition: 82% E-glass 16% Silicone 2% Aluminium powder
Resistance: 350ºC in continuous
Weight: 510 g/m² ±5%
Width: 150 cm
Featured: Insulation of radiant heat and protection to small splashes of melted metal
Aluminized para-aramid fibre fabric with high mechanical, abrasion, cut and vibration resistance. With good behaviour against radiant and convective heat.
Composition: 100% Aluminized Recycled Para-Aramid
Resistance: 260ºC in continuous
Weight: 465 g/m² ±5%
Width: 150 cm ±2%
Featured: Insulation of convective, radiant or direct flame heat.
Nonwoven of pre-oxidized fibers, has a layer of aluminium, that offers a high resistance to passage of flames or fire.
Composition: 96% PAN 4% Aluminium
Resistance: 700ºC
Weight: 550 g/m² ±5%
Width: 150 cm
Featured: Insulation of convective, radiant or direct flame heat.
It is a flame-retardant fabric that acts as a thermal shield against flames and high temperatures.
Composition: 48% Eglass, 44% PPAN, 8% Aluminium
Resistance: 650ºC continuously
Weight: 450 g/m² ±5%
Width: 150 cm ±2%
Featured: This three-layer fabric offers a high level of thermal protection without exceeding 500 g/m², making it easy to handle, install, transport, and cut without fraying.
Lightweight silica fabric aluminized on both sides for high temperatures. It offers excellent thermal stability and fire resistance.
Composition: 62% Silica, 38% Aluminium (alloy 1050)
Resistance: 850ºC continuous
Weight: 290 gr/m² ±5%
Width: 90 cm
Highlight: Thermal insulation
Aluminized silica fabric on one side with high mechanical and structural resistance, even when subjected to high temperatures.
Composition: 85% Silica 15% Aluminium (alloy 1050)
Resistance: 850ºC continuously
Weight: 400 gr/m ±5%
Width: 90 cm
Highlight: Thermal insulation
Showing 1-7 of 7 item(s)