Click for more products.
No produts were found.




The Texfire fire blanket features the CE marking and European certification UNE EN 1869, meeting the technical requirements detailed in the RIPCI. Designed and manufactured in Barberà del Vallès (Spain), it is a safety element that can act as an instrument to extinguish small fires or as a thermal shield for personal protection to cover and prevent burns during an evacuation or escape from the fire scene.

Unlike conventional fiberglass fire extinguisher blankets, the Texfire fire extinguisher blanket is made of NT PREOX 200 non-woven fabric with pre-carbonized fibers that act as a fire barrier due to their inherent flame-retardant properties and their good performance when in direct contact with flames (does not burn, melt, or drip). The fibers used do not irritate the skin, and its needle-punched structure makes it a soft, lightweight, and flexible blanket that is easy to handle.

The edges of the blanket are finished with an overlock seam, with red flame-retardant Nomex® meta-aramid thread. It also includes two pull tabs, indicated with reflective arrows, to facilitate its extraction in case of emergency. The blanket is fully reversible and can be used interchangeably on both sides. It includes instructions for use, maintenance, and folding. This fire extinguisher blanket is available in two sizes.

All fire extinguisher fire blankets manufactured by Texfire have a shelf life of 20 years from the date of manufacture, as required by regulations, even though the fabric of the blanket maintains its flame-retardant properties throughout its useful life.

This model is presented in a stainless steel cabinet with top and bottom ABS covers, to facilitate the quick extraction of the blanket. This fire extinguisher blanket model has been designed to hang on the wall, whether in industrial kitchens or laboratories (the stainless steel cabinet facilitates cleaning of grease and oils) or outdoors. With luminous letters, to facilitate visibility in dark or emergency environments. It has two holes in the back for easy wall hanging. On the front, it includes explanatory drawings for correct use.


  • Certified fire extinguisher fire blanket according to European standard EN1869.
  • High LOI 45-50%.
  • Lightweight, flexible, malleable.
  • Preox fibers do not irritate the skin. Asbestos-free.
  • Finished with red flame-retardant Nomex® thread.
  • Retro-reflective arrows for low-visibility situations due to smoke.
  • Inherent flame retardant, does not burn, melt, or drip.
  • Intrinsic fiber properties, properties do not diminish over time.
  • Certification is valid for 20 years. (see the year of manufacture on the case)
  • Designed and manufactured at Texfire facilities in Barberà del Vallès (Spain).

how to use the fire blanket

Read more
Limited special offer
€94.09 €109.09
Fabric data sheet

Data sheet

Effectivity against fire
UNE EN 1869:1997 | PASS
European Market
UNE EN 1868:1997 | PASS


  • Catering and industrial kitchens.
  • Hostelry and camps.
  • Fire brigades and security services.
  • Automotive and transports.
  • Laboratories.
  • Pharmaceuticals and chemistries.
  • Construction.
  • Theaters and big events.
  • Particular use, to store in the kitchen or in the car.


  • Place the blanket in a place that is reachable and accessible in case of fire.
  • Do not install it on a place likely to ignite.
  • After its installation, check that the blanket can be released smoothly.
  • Do not vacuum, brush or rub, fibers can be released.
  • Not recommended for welding or cutting works.
  • It can mark white surfaces.
  • Place it in covered areas; cases or cabinets are not impermeable.
  • Avoid to submit the fabric to traction, tearing or shearing forces.
  • Check the blanket’s status once a year.
  • EN 1869/1997 Specifies that flame retardant fire blankets ARE NOT reusable and are expected for a single use.
Related products