WELDING BLANKET FOR PLUMBING 1400ºC

Ref:
62-013

HEAT INSULATOR AND FLAME RESISTANT BLANKET FOR WELDING COPPER TUBES WITH TORCH

Welding blanket for plumbing had been designed to protect surfaces, walls and surrounding objects during the welding process of copper tubes in plumbing works. Thanks to its double layer of WELD SX fabric, this Texfire’s blankets performs as a thermal barriers, isolating heat caused by the blowing torch’s flame. The flame retardant features of this fabric are inherent, meaning that they do not decrease either with use or wear.

Texfire’s welding blanket for plumbing is composed by an E-glass fibreglass nucleus, special silicone for high temperatures and carbonized plush.

This multi-layered confers the blanket some mechanical resistance and the ability to perform as a thermal barrier, being able to resist temperatures peaks up to 1400ªC (the maximum temperature of the plumbing torch) and, also, thanks to its thermal insulator feature, it achieves a notable reduction of the heat transference between both sides of the blanket.

Texfire produces and sells this plumbing blanket in two different sizes; 35x25 cm y 50x35 cm, both with a 4 mm thickness. It can be used on both sides, plus it is flexible and light, allowing its easy placement between the copper tubes or any other reduced area where the blowing torch is going to be used.

When installing it, it is recommended to do it in order that the blowing torch’s flame points to the centre of the blanket, avoiding this way the edges or sews. It cannot be washed nor vacuumed.

WELD SX fabric used in its manufacturing achieves the EN ISO 13501-1 certification in 2023 - Classification based on the fire behavior of construction products and building elements – attaining the B s1 d0 results. Additionally, is certified in 2020 with regulation UNE 23727 - Reaction to fire of building materials - achieving an M2 classification.

FEATURES

  • Resists peak temperatures up to 1,400ºC.
  • Flexible and adaptable to reduced areas.
  • Tickness 4 mm.
  • Can be used on both sides.
  • Asbestos free.
  • Performs as thermal insulator and shield.
  • Can be used more than once.
  • Does not fray.
  • Does not contain fibres that can irriate the user.
  • Finished with red flame retardant thread.
  • Light and easy to move.
  • Available in two sizes 35x25 cm, 50x35 cm.
Read more
€23.00 Taxes included for Spain (21%)
Register to check your taxes
Measurements
Fabric data sheet

Data sheet

Fire resistance
UNE 23727 | M2
Convective heat
ISO 9151 | B1
Radiant heat
ISO 6942 | C1
Traction resistance
EN 13934-1 | Warp 2700 N ± 10% Weft 1700N ± 10%
Flame propagation
ISO 15025 | A1-A2
Melted metal splashes
EN ISO 9150 / EN 11611 | CLASS 2
EN ISO 9185 | E3/D3
Water penetration resistance
EN 20811 | 100
Abrasion Resistance
ISO 12947-2 | 20.000 CYCLES
Fire behavior
EN ISO 13501-1 | Results of B s1 d0
APPLICATIONS

APPLICATIONS.

  • Welding of copper tubes.
  • Thermal shield before very located heat sources.

SECTORS.

  • Plumbing.
  • Air conditioning.
  • Boilermaking.
  • Installers.

RECOMMENDATIONS

USE RECOMMENDATIONS.

In case of any damage to the product that may compromise its proper performance, it is recommended to replace it, to ensure maximum safety and protection.

  • Functional on both sides.
  • It is recommended not to wash the product to avoid harming its features.
  • Do not touch when it’s hot to avoid burns.
  • Place the flame into the centre of the blanket.
  • Check its status before every use.
  • It does not expire, its features are inherent and permanent.
  • In case of any damage to the product that may compromise its proper performance, it is recommended to replace it, to ensure maximum safety and protection.
Related products

Settings