Click for more products.
No produts were found.

We use our own and third-party cookies to improve our services by analyzing your browsing habits. Press the ACCEPT button to confirm that you have read and accepted the information presented.
After accepting, we will not show you this message again.

I accept More information

WELDING BLANKET FOR PLUMBING 1400ºC

Ref:
62-013

HEAT INSULATOR AND FLAME RESISTANT BLANKET FOR WELDING COPPER TUBES WITH TORCH

Welding blanket for plumbing had been designed to protect surfaces, walls and surrounding objects during the welding process of copper tubes in plumbing works. Thanks to its double layer of WELD SX fabric, this Texfire’s blankets performs as a thermal barriers, isolating heat caused by the blowing torch’s flame. The flame retardant features of this fabric are inherent, meaning that they do not decrease either with use or wear.

Texfire’s welding blanket for plumbing is composed by an E-glass fibreglass nucleus, special silicone for high temperatures and carbonized plush.

This multi-layered confers the blanket some mechanical resistance and the ability to perform as a thermal barrier, being able to resist temperatures peaks up to 1400ªC (the maximum temperature of the plumbing torch) and, also, thanks to its thermal insulator feature, it achieves a notable reduction of the heat transference between both sides of the blanket.

Texfire produces and sells this plumbing blanket in two different sizes; 35x25 cm y 50x35 cm, both with a 4 mm thickness. It can be used on both sides, plus it is flexible and light, allowing its easy placement between the copper tubes or any other reduced area where the blowing torch is going to be used.

When installing it, it is recommended to do it in order that the blowing torch’s flame points to the centre of the blanket, avoiding this way the edges or sews. It cannot be washed nor vacuumed.

WELD SX fabric, used to tailor the welding blankets for plumbing, is certified in 2020 with regulation UNE 23727 - Reaction to fire of building materials - achieving an M2 classification. It also meets regulation EN ISO 9150 with a Class 2 classification - Behaviour of materials before the impact of small melted metal splashes.

FEATURES

  • Resists peak temperatures up to 1,400ºC.
  • Flexible and adaptable to reduced areas.
  • Tickness 4 mm.
  • Can be used on both sides.
  • Asbestos free.
  • Performs as thermal insulator and shield.
  • Can be used more than once.
  • Does not fray.
  • Does not contain fibres that can irriate the user.
  • Finished with red flame retardant thread.
  • Light and easy to move.
  • Available in two sizes 35x25 cm, 50x35 cm.
Read more
€19.01
rating Read the 14 reviews
Average rating: 5/5 Number of reviews: 14
Measurements
Data sheet

Data sheet

Fire resistance
UNE 23727 | M2
Convective heat
ISO 9151 | B1
Radiant heat
ISO 6942 | C1
Traction resistance
EN 13934-1 | Warp 2700 N ± 10% Weft 1700N ± 10%
Flame propagation
ISO 15025 | A1-A2
Melted metal splashes
EN ISO 9150 / EN 11611 | CLASS 2
EN ISO 9185 | E3/D3
Water penetration resistance
EN 20811 | 100
Abrasion Resistance
ISO 12947-2 | 20.000 CYCLES
Comments
Filter reviews
(12)
(2)
(0)
(0)
(0)
(0)
Reset

Manta Soldadura para fontaneria
rating 5
Buen producto, envío rápido
rating 4
Calidad muy buena y precio acorde a su calidad, aconsejable 100%
5 étoiles
rating 5

Remerciement livraison et date le produit est bien ne pas trop laisser la flamme au meme endroits

rating 5
Superb
high resistance
rating 5
Very good quality and size. I'm plumber and I use a lot of welding blanket
Five stars
rating 5
Every plumber should have one in toolbox
Good price
rating 5
quality-price ratio
rating 5
Exactly as described. Will be purchasing again
Just what I needed!
rating 5
Great for protecting the fireplace switch.
Great!
rating 5
I do HVAC and it works great!
great
rating 5
I used this with a mapp torch to sweat a copper fitting to a bathtub spout. I had to get up against the wall of a cultured marble bathtub to braze the fitting. I put this mat against the wall and heated the fitting frequently directing the flame onto the mat protecting the wall. When I finished I checked the bathtub wall for any heat damage, and not only was there no damage the wall was not even warm. This mat was well worth the price for what it saved me in potential heat damage. Highly recommended.
High quality
rating 5
This product work very good on all small appliances whenever we are welding. Thanks
Perfecta para lo que necesito
rating 5

La compré para aislar unas piezas que estaban sujetas con bridas a una máquina

Buena
rating 4

Probada y perfecta para las soldaduras tanto de fontanería como de arco,lo único es que para mi gusto es demasiado pequeña.

APPLICATIONS

APPLICATIONS.

  • Welding of copper tubes.
  • Thermal shield before very located heat sources.

SECTORS.

  • Plumbing.
  • Air conditioning.
  • Boilermaking.
  • Installers.

RECOMMENDATIONS

USE RECOMMENDATIONS.

  • Functional on both sides.
  • It is recommended not to wash the product to avoid harming its features.
  • Do not touch when it’s hot to avoid burns.
  • Place the flame into the centre of the blanket.
  • Check its status before every use.
  • It does not expire, its features are inherent and permanent.

Related products

Settings