Click for more products.
No produts were found.

We use our own and third-party cookies to improve our services by analyzing your browsing habits. Press the ACCEPT button to confirm that you have read and accepted the information presented.
After accepting, we will not show you this message again.

I accept More information

HIGH TEMPERATURE FABRIC EGLA 1000V

Ref:
21-043

FIBERGLASS FABRIC WITH VERMICULITE COATING FOR HIGH TEMPERATURES.

Fabric for high temperatures EGLA 1000V is a flame retardant fabric composed by a textured fiberglass base, using thick degree threads  (900tex), which bring the fabric some volume and mechanical resistance. Designed to work at high temperatures, being able to resist up to 600ºC in continuous working and 750ºC in working peaks. The vermiculite coating improves the resistance to abrasion and increases the dimensional stability, enhancing the fabric’s useful life. E-glass fiberglass confer some good mechanical features and a good behavior before fire, sparks or incandescent metal splashes.

Flame retardant fabric EGLA 1000V is widely used to contain projections derived from welding processes and operations, cutting, grinding, deburring, oxycut, plasma cutting, etc. It is used as a welding blanket; it resists very well to the impacts of sparks or incandescent particles at high speed. EGLA 1000V fabric has an enclosed and voluminous structure suitable for situations where the fabric is required to contain sparks or to avoid the crossing of incandescent elements. If subjected during long periods to incandescent elements impacts, the fabric will perform well, containing those particles, but it won’t avoid the temperature transference to the other side of the fabric. Even though, the fabric will maintain all its structural integrity.

Thanks to its vermiculite coating, it also offers a great resistance to abrasion caused by vibrations from part in movement, turning it into a suitable fabric to tailor lagging or protection cases.

Fabric EGLA 1000V has been tested in Texfire’s internal laboratories, with regulation UNE EN ISO 15025 – Protection against flames. Testing method for limited flame spreading. - with an A1 –A2 result.

FEATURES.

  • It resists continuous temperatures of 600ºC and peak temperatures of 750ºC.
  • Fabric’s thickness 1,3 mm, 1.035 g/m2 and useful width of 100 cm.
  • Vermiculite coating.
  • Resistant to abrasion and rubbing. Long lasting life.  
  • Textured fibers, which confer a higher volume to the fabric.
  • Enhanced resistance before wearing caused by vibrations.
  • Reversible fabric (same features on both sides).
  • Inherent flame retardant, permanent features, does not expire.
Read more
€18.38
Data sheet

Data sheet

Traction resistance
ISO 4606 | Warp 4500 NT Weft 2500 NT
Flame propagation
ISO 15025 | A1 - A2
Comments
APPLICATIONS

APPLICATIONS.

  • Welding blankets.
  • Heat sinks.
  • Drapes.
  • Thermal mats.
  • Laggings.
  • Dilatation or compensation strips.
  • Expansion / compensation joints.
  • Cases for engines.
  • Cases for parts in vibration or movement.  
  • Coatings of hot parts or areas up to 600ºC.

SECTORS.

  • Welding and Radial cutting.
  • Petrochemical industries.
  • Boilermaking industries.
  • Construction.
  • Naval sector.
RECOMMENDATIONS

USE RECOMMENDATIONS.

  • Can be used on both sides, reversible fabric.
  • As higher the distance from the sparking source, the better it will behave.
  • Can be cut with scissors.
  • Never use alcohols, solvents or detergents to wash it. Flammable remains can remain.
  • It is recommended to store it always rolled as a tube in order to extend its useful life.
  • Check its status before each use.
Related products
€27.88
FLAME RETARDANT FABRIC FOR WELDING + THERMAL BARRIER. Weld SX is a welding fabric, designed and manufactured by Texfire, that resists continuous temperatures of 500ºC and peak temperatures up to 1300ºC. It is a...
€7.62
FLAME RETARDANT FABRIC OF E-GLASS TYPE FIBERGLASS OF 430 GSM. EGLA 430 is a flame retardant fabric of E-Glass type fiberglass, with a satin ligament 4/1, a grammage of 430 g/m2, a thickness of 0,4 mm and a useful...
€47.11
FLAME RETARDANT BLANKET FOR WELDING 900ºC, LIGHT AND REVERSIBLE. WELD S2 blanket for welding is flame retardant and is tailored with Texfire’s WELS2 fabric. It’s designed to be used on both sides, ensuring the best...

Settings