Click for more products.
No produts were found.

We use our own and third-party cookies to improve our services by analyzing your browsing habits. Press the ACCEPT button to confirm that you have read and accepted the information presented.
After accepting, we will not show you this message again.

I accept More information
×

ALUMINIZED FABRIC – NT PREOX 500AL

Ref:
21-034

ALUMINIZED NON WOVEN FABRIC WITH THERMAL BARRIER.

NT PREOX500AL flame retardant fabric is composed by a pre-carbonized fiber non-woven fabric, and an polyacrylonitrile (PPAN) fabric aluminized with a layer of 12 microns of 100% aluminum. Pre-carbonized PPAN fibers, also known as Preox, have a good performance when being contacted directly to flames, with a LOI index close to 40 points in some cases, and they are considered as a good thermal insulator. The aluminized side works as a thermal shield, blocking temperature transference and enhancing thermal insulation in front of convective heat sources , radiant heat, or direct flame. This aluminized non-woven fabric NT PREOX 500AL has a thickness of 4,5 mm, a weight of a little more than 500 g/m2 and great flexibility and adaptability to any object or area, turning this fabric into a good option to tailor flame retardant covers with thermal insulation.

The aluminized side of NT PREOX 500AL fabric conferes to it resistance to flames and protection before radiant ir convective heat sources. In addition, pre-carbonized fibers from the internal side perform as a thermal insulator, turning the set into an excellent thermal shield and thermal barrier. It's insulation features turn it into an excellent solution to protect objects, surfaces or areas. NT PREOX 500AL fabric behaves exceptionally good in welding works, where it comes into contact with the blowtorch's flames used in plumbing works.

NT PREOX 500AL can withstand temperatures up to 300ºC in continuous work being able to arrive up to 700ºC in working peaks. It can be placed in all directions and positions, but it's recommended to use it with the PREOX side (black face) when there is direct contact with fire or flames, and with the aluminum side when is aimed to protect from radiant or convective heat, in the case of using it as a thermal shield.   

NT PREOX 500AL has been tested in internal laboratories according to regulation UNE-EN ISO 6942:2002 -Protection against heat and fire, using the test method: Evaluation of materials and sets of Materials, when exposed to a radiant heat source-, obtaining a C3 result. And according to regulation UNE-EN ISO 9151:2018 - Protection clothes against heat and flames. Determination of heat transferring when exposed to a flame-, with a B1 result.

FEATURES

  • Weight 550 g/m2 useful width 150 cm and thickness 4,5 mm.
  • It resists (during a limited time) the direct contact with flames, even the intensity of a plumbing blowtorch.
  • It can withstand a long exposure to radiant heat and high temperatures.
  • It resists 300ºC in continuous temperatures and up to  700ºC in peak temperatures.
  • Flexible fabric, easy to handle, it does not fray when being cut with scissors, but some fibers can be left.
  • Suitable for indoor and outdoor use.
  • Totally opaque, suitable to protect sensible elements.
  • Its flame retardant features do not decrease with use.
  • It does not expire.
Read more
€26.12
Description

APPLICATIONS

  • Plumbing blowtorch welding blanket.
  • Protector of torch welding.
  • Flame retardant insulation covering.
  • Heat engine insulator.
  • Insulator for tubes and ducts.
  • Thermal barrier.
  • Thermal shield.
  • Covers against fires.
  • Radiant heat protector.
  • Thermal insulator.
  • Cases for drums or pallets.

    SECTORS

    • Torch welding plumbing sector.
    • Construction sector.
    • Foundries and metal industries.
    • Installer and maintenance companies.
    • Logistics, transport and storage industries.
    • Fire protection of valuable objects.
    • Fire protection of risk or flammable products.

      USE RECOMMENDATIONS

      • Use it by the black colored side (PREOX fibers) for a direct flame exposure.
      • Use it by the aluminized side when the heat source is located at some distance and there is no contact with flames.
      • Never use alcohol, solvents or detergents to wash it, flammable rests can remain.
      • Do not rub, brush nor vacuum on the black colored side.
      • The aluminized side can be washed with a wet cloth.
      • The higher the distance from the flame and heat's source, the better the fabric will behave.
      • Check its status before its use.
        Read more
        Data sheet

        Data sheet

        Convective heat
        ISO 9151 | B1
        Radiant heat
        ISO 6942 | C4
        Smoke class
        NF F 16-101 | F2 class
        Fire reaction
        NF P 92 503 | M1 class
        Flame propagation
        ISO 15025 | A1 - A2
        Heat resistance
        ISO 17493 | 180 ºC: Approved
        Combustion spread
        ISO 3795 | 0
        Comments
        Related products
        €13.85
        Fiberglass aluminised fabric EGLA 430 AL is thought to protect before temperature changes, oil and organic acid spills and industrial insulations. Besides its flame retardant features, it is not recommended to use it...
        €8.75
        FLAME RETARDANT AND INSULATING NON-WOVEN NEEDLE-PUNCHED. NT PREOX 200 is a non-woven material composed by pre-carbonized fibers of polyacrylonitrile (PPAN). Widely used as a barrier to fire thanks to its inherent...
        €8.33
        Flame retardant nonwoven fabric TECSTAR® 180 of synthetic fibers offers an inherent resistance to the flame. It is effective to block heat and to perform as a thermal, acoustic and electrical insulator.It is worth...

        Settings

        Menu