Click for more products.
No produts were found.

We use our own and third-party cookies to improve our services by analyzing your browsing habits. Press the ACCEPT button to confirm that you have read and accepted the information presented.
After accepting, we will not show you this message again.

I accept More information
×

COATED FABRIC – EGLA 750IN

Reference: 21-044


FLAME RETARDANT FABRIC WITH A STEEL REINFORCEMENT FOR HIGH TEMPERATURES.

EGLA 750IN is a flame retardant fabric composed by a fiberglass base textured with an armour of inox steel filaments which improves its mechanical resistance, enhancing the stability and integrity of the fabric when being exposed to sustained high temperature works. Also, it has a coating of metallic oxide that holds the fibers and improves the resistance to abrasion and vibrations, raising the fabric useful life same as easing its handling and cutting.

The flame retardant fabric with a steel reinforcement EGLA 750IN has been developed for applications in sustained high temperatures, being able to withstand temperatures up to 700ºC in continuous works. Thanks to its high resistance to abrasion and vibrations, it is widely used as a fabric of the hot surface, for manufacturing cases and laggings of engines, expansion strips, expansion joints, parts in vibration, etc.

Its inox steel reinforced structure guarantees the dimensional stability of the fabric even in extreme situations, when being in direct contact to flames, when glass fibers have lost part of their dimensional stability.

EGLA 750IN fabric has been tested in Texfire’s internal laboratory, with regulation ISO 15025 - Protection against flames. Test method for limited spreading of flames - with an A1-A2 result. Furthermore, it resists up to 8.000 abrasion cycles according to the test ISO 12947-2 - Determination to abrasion resistance of fabrics by Martindale method.

FEATURES

  • Resists contunuous temperatures of 700ºC and peak temperatures of 750ºC.
  • Fabric’s thickness 0,9mm, 730g/m2 and useful wideness of 120 cm.
  • Resistant to abrasion and rubbing. It does not pierce easily. Long lasting life.
  • Only available in light grey.
  • Inherent flame retardant fabric, the steel structure guarantees its integrity up to 1500ºC border cases.
  • Texturized fabric, fibers with higher volume, providing more thickness to the fabric.
  • Fabric for high temperatures, it resists greatly to contact heat.
  • Resistentant to vibrations without degrading.
  • Reversible fabric (same features on both sides).
  • Resistentant to acids and corrosive liquids.
  • When being in contact with flames, it produces little fume.
Read more
€27.07
Description

APPLICATIONS

  • Thermal cases.
  • Coverings.
  • Thermal mats.
  • Laggings.
  • Dilatation or compensation strips.
  • Expansion joints.
  • Cases for engines.
  • Cases for batteries.
  • Cases for parts in vibration or movement.
  • Coating of hot parts or areas up to 700ºC.


SECTORS

  • Constrution.
  • Cement plants.
  • Installing companies.
  • Maintenance companies.
  • Petrochemichal industries.
  • Boilermaking industries.


USE RECOMMENDATIONS

  • Do not exceed 700ªC for continuous works.
  • Handle it with gloves, in order to avoid scuff marks with the steel armour.
  • Can be washed using a wet cloth.
  • Never use alcohols, solvents or detergents to wash it.
  • It is recommended to always store it rolled as a tube to enhance its useful life.
Read more
Data sheet
21-044

Data sheet

Traction resistance
EN 13934-1 | Warp 3000 N, Weft 1500 N
Flame propagation
ISO 15025 | A1 - A2
Abrasion Resistance
ISO 12947-2 | 8000
Comments

Settings

Menu