Click for more products.
No produts were found.

We use our own and third-party cookies to improve our services by analyzing your browsing habits. Press the ACCEPT button to confirm that you have read and accepted the information presented.
After accepting, we will not show you this message again.

I accept More information

COATINGS

Texfire coatings are made paring from a flame retardant textile basis and a coating is applied to boost or increase functional and technical features. Coatings could be applied in one or both sides of the fabric. Texfire works with different types of coating, depending on their final application:

  • · Silicone for high temperatures (WELS)
  • · Polyurethane (PU)
  • · Vermiculite (VER)
  • · Vinyl polychloride (PVC)

Through the fabric coating process, Texfire can customize and design the most suitable product for each situation. Possibility of different colours, different coating grammages, adjusting impermeability, resistance to wind penetration, resistance to melted metal impacts or its behaviour before extreme weldings.

Flire resistant fiberglass fabric with silicone coating on one side, designed to withstand splashes during welding.

Composition: 84%GL 16%SIL
Resistance: 250ºC in continuous. Punctual of 550ºC
Weight: 490 g/m² ±5%
Width: 150 cm
Featured: Resists molten metal splashes

View

Flame retardant fiberglass fabric with silicone coating on both sides, designed to withstand splashes during welding work. Admits its use vertically.

Composition: 72%GL 28%SIL
Resistance: 250ºC in continuous. Punctual of 900ºC
Weight: 590 g/m² ±5%
Width: 150 cm
Featured: Resists molten metal splashes

View

Technical flame retardant fabric recovered of PTFE in both sides, is an excellent thermal conductor, as well as thermo-weldable. Non flammable, resistant to fire.

Composition: 58%PTFE 42%GL
Resistance: -50ºC a +260ºC
Weight: 250 g/m² ±5%
Width: 100 cm
Featured: Resists chemical agents, acids and solvents

View

Flame retardant fiberglass fabric with silicone coating on both sides, designed to withstand splashes during welding work. Admits its use vertically.

Composition: 72%GL 28%SIL
Resistance: 250ºC in continuous. Punctual of 900ºC
Weight: 590 g/m² ±5%
Width: 150 cm
Featured: Resists molten metal splashes

View

Fabric composed by an E-glass type fiberglass base of 1000gsm, offers a great mechanical resistance and is coated with a chemical treatment of vermiculite.

Composition: 72% PTFE 28% GL
Resistance: 600ºC in continuous
Weight: 1035 g/m² ±5%
Width: 100 cm
Featured: Excellent thermal conductor, resistant to abrasion and welding impacts.

View

Fabric of mineral origin with a chemical treatment of vermiculite to enhance its dimensional stability, its resistance against chemical agents, abrasion and tears.

Composition: 100% Sílica
Resistance: 950ºC in continuous
Weight: 650 g/m² ±5%
Width: 91 cm ±2%
Featured: Excellent thermal resistance

View

Settings