Click for more products.
No produts were found.

We use our own and third-party cookies to improve our services by analyzing your browsing habits. Press the ACCEPT button to confirm that you have read and accepted the information presented.
After accepting, we will not show you this message again.

I accept More information

FABRICS FOR EXTREME TEMPERATURES

Texfire has been developing and manufacturing flame retardant fabrics for high temperatures for more than 20 years. Fabrics for extreme temperatures are technical fabrics developed to resist working temperatures from 300ºC up to 1,300ºC. These fabrics are constructions of multi-layered fabric with special coatings to enhance its thermal performance or fabrics reinforced with inox steel filaments to improve its mechanical features, being able to withstand the exposition to extreme temperatures during long periods of time, maintaining its structural integrity.

Thanks to the use of several materials like fiberglass, silice or pre-oxidized polyacrylonitrile fibers, and in combination with different chemical coatings  like vermiculite or silicate calcium, fabrics able to resist extreme temperatures are obtained.

Fabrics for high temperatures are destined to sectors like in foundries, petrochemistries, or those sectors where there is some production process with high temperatures like ovens in cement industries or in welding tasks, among others. Also they are optimal fabrics to use in situations where a protection before high temperatures is needed, combining the action of a thermal barrier with a thermal shield, like being the case of a drop-down shelter for forest firefighters, a flame retardant protector for works of art of a custom-made case for a volcano explorer drone.

Three-layer fire retardant welding fabric that withstands temperatures of 300ºC in continuous and can reach up to 1300ºC in punctual.

Composition: 62% GL 28% PAN 10% SIL
Resistance: 300ºC en continuo
Weight: 730 g/m² ±5%
Width: 150 cm ±2%
Featured: Welding protection

View

Flame retardant fiberglass fabric with silicone coating on both sides, designed to withstand splashes during welding work. Admits its use vertically.

Composition: 72%GL 28%SIL
Resistance: 250ºC in continuous. Punctual of 900ºC
Weight: 590 g/m² ±5%
Width: 150 cm
Featured: Resists molten metal splashes

View

Fabric composed by an E-glass type fiberglass base of 1000gsm, offers a great mechanical resistance and is coated with a chemical treatment of vermiculite.

Composition: 72% PTFE 28% GL
Resistance: 600ºC in continuous
Weight: 1035 g/m² ±5%
Width: 100 cm
Featured: Excellent thermal conductor, resistant to abrasion and welding impacts.

View

Fabric of mineral origin with a chemical treatment of vermiculite to enhance its dimensional stability, its resistance against chemical agents, abrasion and tears.

Composition: 100% Sílica
Resistance: 950ºC in continuous
Weight: 650 g/m² ±5%
Width: 91 cm ±2%
Featured: Excellent thermal resistance

View

This flame retardant mat is a needling made of silica fibers, without resin nor chemical binder. Offers a resistance to the flame and high temperatures.

Composition: >95% Silica
Resistance: 950ºC continuous
Weight: 1300 g/m² ±5%
Width: 100 cm ±2%
Featured: Thermal and acoustic insulator

    View

    Settings